Active-gas type multi-gas incubator
Our original active gassing system & multi-gas makes it possible to mass culturing in hypoxic conditions.
Example of use; MG-71C-A and 10-tire plate
Large scale stack and suspension culture in in hypoxic conditions.
Mammalian cell culture
Active gassing (PAT.P) is possible
Low-oxygen gas is directly sendable in a container. Effective on shaking culture by Erlenmeyer flask, spinner flasks and 10-tire plate.
Small device such as shaker can be used inside chamber
Can be adapted to suspension culture by combining with shaker and stirrer. MG-71M-A has connection hole for power cable to go out.
||20 to 500mL/min, Digital display
||3 to 10%, Digital display, Increment: 0.1%
||1 to 25%, Digital display, Increment: 0.1%
||Ambient+5ºC to +50ºC
|Temp. Control Accuracy
||±0.2 ºC (at below +25ºC, set at +37ºC, CO2:5%)
||Heating method: air jacket
||476 x 601 x 638Hmm
||354 x 425 x 418Hmm
Vessel availability: for example, 10-tire plate x 1, 3L spinner flask x 1 + stirrer, 250mL flask x 6 + small shaker, etc.
||Hole for power supply cable etc. (Φ30mm) x 2
||PVC hose (10m) x 1, hose band x 4
(*)Optional accessories are required for active gassing in various containers. (see below)
●Two levels stackable.
Forced ventilation of the spinner flask (500ml-3L)
6 branch tube for MG-7*-A series
Cap with connector for 125/250ml Corning disposal Erlenmeyer's flask
For MG-7*-A series, required when setting shaker or sturer inseide.
Special challenge for multi-stage culture vessel MG-7*-A series.
Regulator for MG-71 series
Required when using the flask cap for MG
High humidity-resistant shaker for use in a moist chamber such as CO2 incubator and pl ...
Cost effective CO2 incubator compared with competitors in the same range of products. ...
Our original active gassing system makes it possible to mass culturing of adhesion cel ...
"Hypoxia booster" makes quick transition to hypoxic condition.