Chiller for open circuit
Code No.： 0031811-000
【discontinued】The line-up of open circuit chillers can be chosen according to the required capacity and temperature control accuracy. Precise temperature control type. Various output and external sensors can be used. Closed circuit is available as an option.
Applications●Circulation into temperature control water bath for inspection samples
●Temperature control for culturing apparatus and analytical instruments (Optional)
Down Load（Useful Information）TAITEC general catalog-Coolpump CP-80R/150R and Coolnit CL-80R/150R/300N/600N (PDF)
FeaturesThis product has been discontinued.
For open circuit machine used for mainly circulating to the water bath.
Circulation system for open c i r cui t i s u sed mainl y for preparing a constant temperature chamber. It is optimum for controlling the temperature of the sample.
Closed circuit is also available as an option.
Use the optional port tank and the thermal insulation water tank for circulation into scientific instruments (closed circuit circulation). Even for obj ect s wi th hi g h p i p ing resistance such as rotary evaporators, circulation can be easily started with the built-in priming pump.
|Temperature range||-10℃ to +70℃|
|Control accuracy(*1)||±0.03 to 0.3℃|
|Cooling capacity(*2)||approx. 270W|
|Compressor (air cooled-type) output, Refrigerant||150 W, R134a|
|Pumping capacity（50/60Hz）||Max. flow rate: approx. 9/10 L/min|
Max. lift height: approx. 4/6 m
|Nozzle diameter||Outer diameter φ13 mm|
|Safety device/function||Short/Over current breaker, Low flow (buzzer and LED display), High temperature, Freeze protection, Freezer high temperature cutting circuit (auto stop at 40℃ of circulating fluid)|
|Other Functions||Digital flow display, Remote temperature control connector, Connector for external sensor, External output terminal of cutout operation, Output terminal for thermograph (DC 0 to 1 V, -20℃ to +80℃)|
|Power Supply(*3)||AC100V/13.5A (Need a step-down transformer)|
|Standard Accessory||Heat insulating hose for circulation (1m) x 2, Hose band x 2|
|(*1)When using enough water and agitation inside water bath. Temperature regulation accuracy may vary depending on the circulating fluid, setting temperature, environmental temperature, bath volume, and circulating flow.|
|(*2)When circulating fluid is +10℃, 50 Hz.|
|(*3)Allowance of voltage variation is ±5% for AC 100 V.|
|•Environmental temperature for this product is +5℃ to +30℃. When using at above +30℃, the cooling capacity may be reduced. The Lid of the water bath may be needed depending on the bath shape and the setting temperature.|
|•Please do not use pure water or distilled water. These may cause breakdown of the machine.|
|•Please use heating medium when setting below +7℃.|
|•External program control is possible by using the optional program unit only in the case below 40℃.|