Chiller for open circuit
Code No.： 0068824-000
The line-up of open circuit chillers can be chosen according to the required capacity and temperature control accuracy. Precise temperature control type. Various output and external sensor can be used. Closed circuit is available as an option.
Applications•Circulation into temperature control water bath for inspection samples
•Temperature control for culturing apparatus and analytical instruments (Optional)
Down Load（Useful Information）TAITEC general catalog-Coolpump CP-80R/150R and Coolnit CL-80R/150R/300N/600N (PDF)
For open circuit machine used for mainly circulating to the water bath.
Circulation system for open circuit is used mainly for preparing a constant temperature chamber. It is optimum for controlling the temperature of the sample.
Thermograph and safety device actuation signal can be used.
Output of thermograph, safety device actuation signal, and optional external sensor. Programmed control is available by using the optional program unit.
Cooling in high temperature range
The CL-600N is equipped with a “Cooling at high temperature range” function that can control cooling even in a high temperature region.
|Temperature range||-15℃ to +70℃|
|Control accuracy(*1)||±0.05 to 0.5℃|
|Cooling capacity(*2)||approx. 750W|
|Compressor (air cooled-type) output, Refrigerant||600 W, R404A|
|Pumping capacity（50/60Hz）||Max. flow rate: approx. 15/17 L/min|
Max. lift height: approx. 8/11 m
|Nozzle diameter||Outer diameter φ22 mm|
|Safety device/function||Short/Over current breaker, Low flow (buzzer and LED display), High temperature|
|Other Functions||Digital flow display, Remote temperature control connector, Connector for external sensor, External output terminal of cutout operation, Output terminal for thermograph (DC 0 to 1V, -20ºC to +80 ºC)|
|External dimensions||380×540×706H mm|
|Power Supply(*3)||AC 100 V・30 A|
|Standard Accessory||Heat insulating hose for circulation (1m) x 2, Hose band x 2|
|(*1)When using enough water and agitation inside water bath. Temperature regulation accuracy may vary depending on the circulating fluid, setting temperature, environmental temperature, bath volume and circulating flow.|
|(*2)When circulating fluid is +10ºC, 50Hz.|
|(*3)Allowance of voltage variation is ±5% for AC 100V.|
|●Environmental temperature for this product is +5ºC to +30ºC. When using at above +30ºC, the cooling capacity may be reduced. The lid of the water bath may be needed depending on the bath shape and the setting temperature.|
|●Please do not use pure water or distilled water. These may cause breakdown of the machine.|
|●Please use heating medium when setting below +7ºC.|
|●External program control is possible by using the optional program unit only in the case below 40ºC.|