e-TAITEC.com

Product Info

Constant temperature water bath with exocyclic coolnit bath

Thermo supplier EZ-101

Code No.: 0043201-000

External circulation while using water bath is available. Addressed to high temperature, silicon oil can be used as well. EZ-101 for high temperature range.

EZ-101 and optional immersion cooler "Cool pipe"

Applications

Circulation to device which need temperature regulation at high temperature.
Quality test at high temperature using water bath.
Moisturizing and Cooling for samples.

Features

●Silicon oil can be used in the heat insulated water bath.
●External circulation function by variable flow rate. Wetted parts are made of stainless steel overall.
●Available from -30℃ – +200℃ by combining the optional immersion cooler “Cool pipe” (when setting +30℃ or more, cool pipe is removed).

Specifications

ModelEZ-101
Temperature range+60℃ to +200℃ (*1) (*2)
Control accuracy±0.1 - 0.3℃ (*3)
Pumping capacity(50/60Hz)Max.flow rate: approx. 8/10 L/min (variable)
Max. lift height: approx. 4/5 m
Heater1200W
Nozzle diameterOuter diameter φ10mm
Safety device/functionShort/Over current breaker, Fuse (3A), Floating type boil without water protection (with protection of chattering), Thermosense type boil without water protection, Thermal switch for motor protection, High and Low temperature protection of sample, Diagnosis of temperature sensor error (disconnection/short), Diagnosis of low water level error, Alarm for high and low temperature protection of sample
Other FunctionsAgitating inside water bath, Cooling pipe (Outer diameter φ8mm) (*2), Immersion cooler port
Dimensions inside bath170×300×145Hmm
Effective dimensions inside bath150×100×140Hmm
Water bath capacity (water level 80%)approx. 6L
Dimensions230×368×407Hmm
Weightapprox. 15kg
Power SupplyAC100V, 13A
Standard AccessoryStainless steel lid×1
(*1)Temperature setting is available between -30ºC - +200 ºC. When setting temperature lower than RT, please use Immersion cooler together. There is special opening for Immersion cooler. When setting below +7ºC, please use antifreeze. When setting above +70ºC, please use heating medium for high temperature.
(*2)When setting around RT - +60ºC, please circulate cooling water (tap water) in cooling pipe. Temperature rise by work heat from mixing pump need to be minimized at below +60ºC.
(*3)Performance may not be maintained due to environmental temperature, power supply etc.
•Please do not use pure water or distilled water. These may cause breakdown of machine.

Dimensions

Accessories

Silicone oil MA-50 | Silicone oil MA-50
Kinetic viscosity 50mPa sec (cSt), 18kg, for precise temperature control and use higher than +70 ºC.
■: ■:
Silicone oil MA-100 | Silicone oil MA-100
Kinetic viscosity 100mPa sec (cSt), 18kg, for use higher than +70 ºC.
■: ■:
Antifreeze | Show Brine Blue
Use when needed together with low temperature water bath unit or immersion cooler.
■Weight:20kg, 1 can ■:

Related Products

Constant temperature water bath with exocyclic coolnit bath | Coolnit bath | EL-8F
External circulation while using water bath, variable flow rate. Can also be used for calibrating the thermometer. Remote control and temperature programming is available as an option.
■Temperature range:-10℃ - +70℃ (*1) ■Control accuracy:±0.1 - 0.3℃ (*2)
Constant temperature water bath with exocyclic coolnit bath | Coolnit bath | EL-15F
External circulation while using water bath, variable flow rate. Can also be used for calibrating the thermometer. Remote control and temperature programming is available as an option.
■Temperature range:-10℃ - +70℃ (*1) ■Control accuracy:±0.1 - 0.3℃ (*2)
Constant temperature water bath with exocyclic coolnit bath | Thermo supplier | EZL-81F
External circulation while using water bath is available. Addressed to high temperature, silicon oil can be used as well. EZL-81F for low to high temperature range.
■Temperature range:-10℃ to +100℃ (*1) (*2) ■Control accuracy:±0.1 - 0.3℃ (*3)
Translate »