Product Info

Active gas ventilation type large CO2 incubator for stack plate

Prescyto MG-1300M-2A

Code No.:

CO2 incubator for large scale cell culture and production of vaccines, monoclonal antibodies, etc. by stack plates

Rotating rack is optional


For large static scale cell culture
For production of vaccines
For production of monoclonal antibodies


High capacity for static cell-culture
MG-1300M-2A is an incubator optimized for 10 or 40 layered stack plates: ThermoFisher [Nunc] Cell Factory and Corning CellSTACK.
Precise gas monitoring and regulation
IR CO2 sensor and zirconia O2 sensor installed in MG-1300M-2A are reliable for constant cell culture with long-term stability.
Temperature control optimized for culture with stack plates
A cross-flow fan in chamber and heating system for gas flow-line promote ideal culture condition in stack plates.
Built-in PC for validation documentation
Operating parameters (temperature, CO2 concentration and gas flow) are graphically displayed on the panel and recorded on the built-in PC based on GMP standards.
We can make customized models upon user’s request: such as 4 ch model, O2 contorol model, no-heater model for incubation room etc. Please contact us.
TAITEC MG-1300M and CBR-500S DemoMovie


Temp.control rangeAmbient +5℃ to 40℃
Temp. Control Accuracy±0.5℃(*1)
Dimensions (interior)1100×740×1300Hmm
Ambient temp. range+5℃ to +30℃
Heating methodAir jacket. 4 heaters on each side in chamber.
Heating gas inflow line.
Flow controlMass flow controller for each channel
CO2 Sensor/Control rangeIR sensor, 3.0 to 8.0% (Increment: 0.1%)
CO2 Sensor/Control rangeZirconia sensor, 1 to 25%
Gas supplyMax. 2L×2 lines (Compatible with 40 layers x 2 lines), Min. 0.1L
setting unit: 0.02L in use
Safety devicesControl PCB alarm (Buzzer), Heater cut off when the door open
Safety functionHigh/low temperature, Pressure of gas and air, CO2 concentration, O2 concentration, Flow rate for each channel, Door open/close with buzzer
Material of chamberstainless (sus304)
Power supplyAC220V/4A (*2)
Record contentsLog of time, Temperature, CO2 concentration, Flow rate
RecordRecording at built -in PC (*3), Output at USB memory.
Graphical displayRecorder contents
Required gus supplyCO2 gas line
(*1)This value is under the condition of room temp. at +25℃ and, setteing temp. at +37℃ and 5% of CO2 concentration.
(*2)The power supply of built-in PC should be supplied from another outlet.
(*3)Not complied with Part11.
●This product is build-to-order manufacturing.

Related Products

CO2 incubator | Prescyto | MG-71C
Cost effective, high quality conventional CO2 incubator.
■Temperature Range:Ambient+5ºC to +50ºC ■Temp. Control Accuracy:±0.2 ºC (at below +25ºC, set at +37ºC, CO2:5%)
Active-gas type CO2 incubator | Prescyto | MG-71C-A
Our proprietary technology "Active Gas Ventilation" Multi-gas incubator. Optimal for Large scale and Hypoxic culture with Multilayer culture plates.
■Flow:20 to 500mL/min, Digital display ■CO2 Range:3 to 10%, Digital display, Increment: 0.1%
Active-gas type multi-gas incubator | Prescyto | MG-71M-A
Our proprietary technology "Active Gas Ventilation" CO2 incubator. Optimal for Large scale culture with Multilayer culture plates.
■Flow:20 to 500mL/min, Digital display ■CO2 Range:3 to 10%, Digital display, Increment: 0.1%
| Manual manipulator with carts | HM-40
Option of manual manipulator with carts to handle 40 layer stack plate in filling and emptying of culture broth and / or trypsin treatment.
■: ■:
Translate »