e-TAITEC.com

Product Info

Large inverter chiller CH series (Water-cooled integrated type)

Cooling pump CH-18000W

Code No.:

The water-cooled integrated type and ideal for cleanroom. Can be customized based on the following specifications upon request such as compressor output up to 18 kW, etc. from a wide range of options.

Picture of CH-15000W ※The appearance is subject to change.

Applications

The temperature control for Semiconductor manufacturing equipment

Down Load(Useful Information)

TAITEC general catalog - Cooling pump CH-6000W/7500W/9000W/11000W/15000W/18000W (PDF)

Features

●The water-cooled integrated type is ideal for cleanroom
●Customizable upon request as a special order
●The compressor output above 18 kW can be custom-made

When the water temperature of the cooling tower is not stable during the summer hot season, and by using it as the primary cooling water of water-cooled chiller, a stable temperature cooling water can be obtained. (The cooling tower is actually installed outdoors).

Specifications

ModelCH-18000W
Temperature range+5℃ to +25℃
Control accuracy(*1)±2.0 to 3.0℃, Compressor On-Off control
Cooling capacity[kW](50/60kHz, Circulation temperature at +20℃)(*2)57.4/60.3
Compressor output, Refrigerant9.0kW×2, R407C
Pumping capacity(50/60kHz)(*3)Ask us
Safety device/functionShort/Over current breaker, Overload protector, High and Low temperature, Refrigerant high and low pressure, Overheat protector for Compressor, Phase-reversal relay, Overheat protector for Compressor, Low water cut off, Warning indicator lamp
Water bath capacity(at 80% water level)Ask us
Required primary cooling water rate [L/min](cooling water temperature: +25℃/+34℃)(*4)Ask us
Connecting pipe diameter (circulating fluid in/out, primary cooling water in/out)Ask us
DimensionsAsk us
WeightAsk us
Power Supply/Operation currentAC200V, 50/60Hz/three phase *Ask us for more information.
(*1)Performance may not be maintained due to environmental temperature, heat load, circulation pipe distance, etc.
(*2)Capacity when the ambient temperature at below +30℃.
(*3)Capacity when using tap water. Flow rate when the discharge pressure at 0.1 MPa.
(*4)The required cooling water flow increases and decreases by the temperature. Please note that if the flow rate does not increase when the temperature is high, it may cause problems.
•Since the water-cooled type requires primary cooling water for cooling, please make sure the specified flow rate is secured.
•Standard products cannot use pure water as circulating fluid.
•Please ask us when mixing chemicals for water treatment to circulating fluid.
•The fee for Delivery and Installing are quoted separately.

Related Products

Large inverter chiller CH series (Water-cooled integrated type) | Cooling pump | CH-6000W
The water-cooled integrated type and ideal for cleanroom. Can be customized based on the following specifications upon request such as compressor output up to 18 kW, etc. from a wide range of options.
■Temperature range:+5℃ to +25℃ ■Control accuracy(*1):±2.0 to 3.0℃, Compressor On-Off control
Large inverter chiller CH series (Water-cooled integrated type) | Cooling pump | CH-7500W
The water-cooled integrated type and ideal for cleanroom. Can be customized based on the following specifications upon request such as compressor output up to 18 kW, etc. from a wide range of options.
■Temperature range:+5℃ to +25℃ ■Control accuracy(*1):±2.0 to 3.0℃, Compressor On-Off control
Large inverter chiller CH series (Water-cooled integrated type) | Cooling pump | CH-9000W
The water-cooled integrated type and ideal for cleanroom. Can be customized based on the following specifications upon request such as compressor output up to 18 kW, etc. from a wide range of options.
■Temperature range:+5℃ to +25℃ ■Control accuracy(*1):±2.0 to 3.0℃, Compressor On-Off control
Large inverter chiller CH series (Water-cooled integrated type) | Cooling pump | CH-11000W
The water-cooled integrated type and ideal for cleanroom. Can be customized based on the following specifications upon request such as compressor output up to 18 kW, etc. from a wide range of options.
■Temperature range:+5℃ to +25℃ ■Control accuracy(*1):±2.0 to 3.0℃, Compressor On-Off control
Large inverter chiller CH series (Water-cooled integrated type) | Cooling pump | CH-15000W
The water-cooled integrated type and ideal for cleanroom. Can be customized based on the following specifications upon request such as compressor output up to 18 kW, etc. from a wide range of options.
■Temperature range:+5℃ to +25℃ ■Control accuracy(*1):±2.0 to 3.0℃, Compressor On-Off control
Translate »