Drying Chamber DC-280
Code No.： 0058183-000
Bench-top Desiccator optimized for Vacuum drying and Freeze drying. Promotes drying by heating the sample with a Built-in Heater on each shelf in addition to decompression.
Applications•Drying of Biological samples
•Drying of Testing samples such as Foods, etc.
•As a Storage for reagents and samples weak to moisture
Built-in Heater on each shelf promotes Drying efficiency.Enables valued samples to be dried efficiently.
It can be turned ON/OFF from each shelf (cannot be changed during decompression).
Effective to use thin and wide containers such as Petri dishes to dry paste samples.
Easy to store wide thin containers that can increase drying efficiency.Because the back side of each large shelf Heater is provided,
it promotes drying efficiency thanks to the large surface area of heating.
Outlet inside chamber and Two nozzlesEquipped with an Outlet inside the chamber and Two nozzles (for suction and leak/gas purge combined use). Suction and Gas replacement can be done delicately from here.
Combined with Freeze Dryer/Lyophilizer (VD series)
Enables to put the trapping for multiple dryers together into one by using the “Freeze Dryer VD-250R/550R/800R” (See page 156) with Multiple tubes mounted as a cold trap. Although each dryer is switched and used, when they are not used simultaneously, a number of Multiple tubes and dryers such as DC-280 can be connected (Max. 8 ports in Multiple tubes of VD series). The VD-250R and DC-280
2-port multiple tubes (MP-020) in combination are shown in right for reference.
The DC-280 is connected to Multiple tubes with the vacuum hose.
|Number of Shelves/Size||Three sheleves (aluminum made), 258 x 250 mm|
|Heater||on the back of each shelf, can be turned ON/OFF by each shelf|
Shelf surface approx. 30℃ when ON turned (under reduced pressure)
|Vacuum gauge||Bourdon tube Vacuum gauge|
|Suction nozzle outer dia.||φ14mm|
|Vacuum release||Manually operated, by outer dia. φ 9 mm Needle valve (gas purge combined use)|
|Outlet inside chamber||Max. AC100V/3A|
|Dimensions||430(W) x 400(D) x 615(H)mm|
|Power supply||AC100V/3A (Main unit only)|
AC100V/7A (at Max. use of outlet for interlocking)
|Standard accessories||3 x Acrylic shelf without heater|
|●Use a vacuum pump with displacement 50 to 100l/min. It might be distorted or broken if use a pump that is larger than 100l/min. Suction work slowly using valve.|