e-TAITEC.com

Product Info

Cold Trap

Freeze Trap VA-800R

Code No.: 0057755-000

This device efficiently collects water sublimated by centrifugal concentration, assists the displacement volume of the pump, and directly contributes to the concentration speed. It reduces cross-contamination by agglomerating the vapor phase of the concentrated and sublimating sample.


Applications

As a Cold Trap for the Centrifugal Concentrator
As a preliminary freezing tank for Lyophilization
As a freezing tank during freeze-fracturing

Down Load(Useful Information)

General Catalog

Features

Direct collecting into a Cooling chamber or trapping into a Glass condenser
Use the Lid with nozzle (sold separately) when trapping vapors directly to the Cooling chamber (See left figure below). The advantage of directly trapping is that the collection efficiency is very high. This is because it is directly cooled by a cooling pipe while maintaining capacity. The solvents are limited to water and non-corrosive alcohol as the solvent is directly in contact with the unit. For other solvents, trap by using the Glass condenser (sold separately) (See right figure).

Cooling chamber inside (VA-800R)

Digital Temperature Monitor
The temp. inside the Cooling chamber can be checked in the VA-800R (Slight deviations may occur in the displayed temp. depending on the usage conditions.).

Specifications

ModelVA-800R
Cooling temp./range-70℃
Trapping volume (*1)Approx. 1000mL/time
Cooling chamber inside dimensionsInnerφ210 x H250mm(Volume: Approx. 8.6L)
Cooling coil inner dia.φ160mm
Compressor400 W × 2
Dimensions (W x D x H)420 x 490 x 810mm
WeightApprox. 82kg
Power supplyAC100V/13A (Need a step-down transformer)
(*)The value when the Glass condenser (sold separately) is used.
•Ask us when used as a preliminary freezing tank or a cool circulating water bath.

Dimensions

Accessories

Lid with nozzles | NF-040
Lid with nozzles for VA-800R
■Trapping volume etc.:Stainless steel made, Nozzle ...
Glass condenser | GC-070
Glass condenser for VA-800R
■Trapping volume etc.:Nozzle outer dia.φ13.8mm, Tr ...
System Stand | System Stand C-type
A two-stage stand, 405×500×655Hmm
■Dimensions:405×500×655Hmm ■Applicable models:VA-5 ...
System Stand | System Stand E-type
A two-stage stand, 450×580×600Hmm, with Power Outlet
■Dimensions:450×580×600Hmm ■Applicable models:VA-5 ...

Related Products

Cold Trap | Freeze Trap | VA-250F
This device efficiently collects water sublimated by centrifugal concentration, assists the displacement volume of the pump, and directly contributes to the concentration speed. It reduces cross-contamination by agglomerating the vapor phase of the concentrated and sublimating sample.
■Cooling temp./range:-45℃ ■Trapping volume (*1):Approx. 200mL/time
Diaphragm-type Vacuum Pump | | DTC-60
Oilless pump with corrosion resistance. Ultimate pressure: 1kPa, Displacement: 60L/min
■Chemical resistance:Water, Weak acid, Organic solvent etc.(*) ■Displacement:60L/min
Oil-sealed Rotary Vacuum pump | | GLD-051
Oil rotary vacuum pump with the optimal displacement and vacuum for Freeze drying.
■Chemical resistance(*1):Water ■Displacement:50L/min
Oil-sealed Rotary Vacuum pump | | GCD-051XA
Oil rotary vacuum pump with the optimal displacement and vacuum for Freeze drying.
■Chemical resistance(*1):Water, Organic solvent ■Displacement:50L/min
Oil-sealed Rotary Vacuum pump | | GLD-137CC
Oil rotary vacuum pump with the optimal displacement and vacuum for Freeze drying.
■Chemical resistance(*1):Water ■Displacement:135L/min
Oil-sealed Rotary Vacuum pump | | GCD-136XA
Oil rotary vacuum pump with the optimal displacement and vacuum for Freeze drying.
■Chemical resistance(*1):Water, Organic solvent ■Displacement:135L/min
Translate »