e-TAITEC.com

Product Info

Immersion cooler

Cool pipe 150LF

Code No.: 0013973-000

Easy to insert the tip of the cooling pipe in the object for use. For making the Thermominder, a Low temp. constant bath and Cooling for trapping vessels for Concentrator.


Applications

Combined with Constant temperature Water bath
Cooling for trapping vessels and Reaction container
Cooling for Samples

Down Load(Useful Information)

General Catalog

Features

Simply Immersion cooler, becomes low temperature constant temperature chamber by combination
Combination with Thermominder and heat insulating water bath
This product is cooling machine with putting cooling pipe into water bath. Machine itself doesn’t have temperature regulation though, it can be used as precise low temperature constant temperature chamber by combining with Thermominder.
Cooling pipe is flexible tube
Cooling pipe is made of stainless steel and flexible. It is corrosive resistant and freely bends.

Specifications

Model150LF
Temperature range (*1)-15℃ to +30℃
Cooling capacity (*2)Approx. 290 W
Condenser (Air-cooled) output150 W
Cooling Pipe StructureStainless steel Flexible tube
IPipe Immersing part dim.φ16 mm × 500 mm
Pipe Thermal insulation length1m
Unit Dimensions (W×D×H)310 × 410 × 320 mm
WeightApprox. 28 kg
Power supplyAC100V/4A (Need a step-down transformer)
(*1)Not equipped with a Temperature control function. Use together with Thermominder, etc. if necessary.
The Min. temp. may not be reached depending on the ambient temperature.
(*2)The value under the conditions of ambient temp. 25℃ and liquid temp. 10℃ at 50 Hz.
●When using a temperature controller, the temp controller that controls the heater is recommended to protect the refrigerator.
●Use a heater with capacity larger than cooling capacity of this product when using together Thermominder, etc.
●Use an antifreeze that does not corrode Stainless steel, Chemically and Thermally stable and a viscosity of below 30 mm2/s (specific gravity 1.0) in within operational temp. range
●Do not bend the Cooling pipe too much (Min bending radius is 50 mm for fixed bending). It may crack and cause gas leakage if bent forcibly. Do not immerse the heat insulation part of the Cooling pipe (the part where the black insulation material is wound) in liquid.
●Cannot be used with Seawater.

Dimensions

Accessories

Pipe clamp | Pipe clamp
Fix cooling pipe of Immersion cooler to water bath
■: ■:
Antifreeze | Show Brine Blue
Use when needed together with low temperature water bath unit or immersion cooler, use when setting below +7℃
■Weight:20kg, 1 can ■:

Related Products

Immersion cooler | Cool pipe | 80LF
Easy to insert the tip of the cooling pipe in the object for use. For making the Thermominder, a Low temp. constant bath and Cooling for trapping vessels for Concentrator.
■Temperature range (*1):-10℃ to +30℃ ■Cooling capacity (*2):Approx. 150 W
Immersion cooler | Cool Pipe | 250DF
Usability is the same as 80LF/150LF, while these can enable Ultra Low temperatures. Coolability for 250DF is to -45℃.
■Temperature range (*1):-45℃ to +30℃ ■Cooling capacity:Approx. 130 W (*2)
Unit water bath | Thermominder | SDN-B
Even water level of 45 mm from the bottom of the bath can be used. Thermal insulation tray is included. The EXN-B is equipped with Temp. control accuracy with two decimal places and a Timer function.
■Temperature range (*1):5℃ above RT to +70℃ ■Settable temp. range (*2):-20℃ to +100℃
Unit water bath | Thermominder | EXN-B
Addressed to low water of 45mm to fit to micro tube and small test tube. Optimum for examination.
■Temperature Range:RT+5ºC - +70 ºC ■Temperature setting:-20℃ - +100℃ (*1)
Translate »