Compact CH series: Air-cooled integrated type, Precision temperature control, 200 V
Cooling pump CH-602B
Code No.： 0053790-000
Air-cooled type CH series with excellent portability for 200 V power supply. Built-in heater makes precise temperature control. Cooling in high temperature range, Wide temperature range, Various output, and external sensors are available.
Applications•Precise temperature control for a press working mold
Down Load（Useful Information）TAITEC general catalog - Cooling pump CH-402B/602B/802B
TAITEC general catalog - Pump units for Compact CH series (PDF)
TAITEC general catalog - Model selection guide for Compact CH series (PDF)
Features●The air-cooled integrated chiller does not require primary cooling water and plumbing.
●The unit type pumps can be selected according to the purpose.
Cooling in high temperature range.
Precise temperature control for a press working mold.
Precise temperature control for the upper and lower stages of the press working mold. Circulate two with one unit is available as an option. It can control the temperature of the upper and lower stages of the press working mold (within the capability).
|Temperature range (*1)||-10℃ to +80℃|
|Ambient temperature range||+5℃ to +35℃|
|Control accuracy (*2)||±0.5℃ , Heater PID control|
|Compressor output, Refrigerant||600W, R404A|
|Cooling capacity（at 50Hz）(*3)||approx. 1.0kW|
|Temperature setting display||Digital system (setting/display switching system)|
|Safety device/function||Short/Over current breaker, Alarm and warning for compressor, High and Low temperature, Alarm and warning for pump motor, Temperature sensor abnormality diagnosis circuit, Alarm for replenishing liquid, Low-water cut off, Phase-reversal relay|
|Other Functions||Temperature check monitor, Remote temperature setting, Temperature monitor signal output, Safety device actuation signal output, External temperature sensor connection (*4)|
|Water bath capacity (*5)||approx. 26L（ water level 80%）|
|Applicable pump unit||P-320, P-420, P-52|
|External dimensions（Pump unit not included）||407×565×766H mm|
|Weight（Pump unit not included）||approx. 68kg|
|Power Supply（Pump unit not included）||AC 200 V・50/60 Hz, Three-phase 15A|
|Operation current（Pump unit not included）||10A|
|Standard Accessory||Power code , Drain hose x 1,Connector for signal x 1|
|(*1)When setting below +7ºC, please be sure to use antifreeze (Please ask us for details).|
|(*2)Performance may not be maintained due to the heating medium, environmental temperature, heat load, circulation pipe distance, etc.|
|(*3)Capacity when using tap water and the circulating fluid temperature at 10 ℃ . The capacity varies with the pump unit mounted.The capacity decreases when the ambient temperature is above +30℃|
|(*4)External temperature sensor (φ4×250mm) is available as an option.|
|(*5)Due to the structure not being sealed, the circulation liquid may evaporate and reduce depending on the set temperature and heating medium type.|