e-TAITEC.com

Product Info

Ultrasonic homogenizer

Ultrasonic homogenizer VP-300N

Code No.: 0075955-001

Easy operation. High output is suitable for large volume samples. Used with the stand. Various horn options are also available.

Image of optional stand
Crushing of E. Coli

Applications

Disruption and Solubilization of E. coli where protein is expressed
Random fragmentation of Genomic DNA,Emulsification of samples

Down Load(Useful Information)

General Catalog

Features

Oscillation and Operation mode
Optimal oscillation is done by setting the chip used on the screen. PWM operation mode automatically adjusts the output according to the viscosity change of the sample. POW operation mode performs stable oscillation when the sample viscosity and temp. SEN operation mode controls the output so that the value of oscillation sensor inside constantly. (Effective for Sonicating for a long time with optional continuous disruption cell)

Specifications

ModelVP-300N
High frequency outputMaximum 300 W
Transducer normal output50 to 200 W (*)
Oscillation frequency range19 to 21 kHz
TuningAutomatically
Operation modePWM operation:
Automatic output adjustment according to viscosity change of sample
POW operation:
Stable oscillation when change in viscosity or temp are small
SEN operation:
Controls the output so the value of oscillation sensor inside is constant
Other functionsTimer operation (1 sec to 120 min)
Programmed interval operation (ON: 3 to 60 sec, OFF: 1 to
60 sec)
ConfigurationMain unit, Converter, φ12 mm Standard horn (Preinstalled Tip)
Oscillation switchEquipped in Main unit (Optional foot switch can be used)
Dimensions (W×D×H)/Weight143 × 360 × 283 mm, Approx. 6.7 kg
Standard accessoriesStandard horn (φ12 mm: VP-HN12), Tip (φ12 mm: VP-ET12)
Power supplyAC100V/5A (Need a step-down transformer)
(*)The upper limit varies depending on the horn and the tip used.

Dimensions

Accessories

φ12mm Standard horn | VP-HN12
Standard horn attached to VP-300N
■Processing amount:10 - 250ml sample(*) ■Standard ...
φ20mm Standard horn | VP-HN20
For VP-300N
■Processing amount:25 - 500ml sample(*). ■Standard ...
∅12mm tip | VP-ET12
End of the standard horn may attrite gradually by using so can be replaced as tip (tip is attached to standard horn).
■: ■:
∅20mm tip | VP-ET20
End of the standard horn may attrite gradually by using so can be replaced as tip (tip is attached to standard horn).
■: ■:
∅12mm extender | VP-EX12
Use extender when processing sample in long container (such as separation funnel) which standard horn/tip cannot reach.
■: ■:
∅20mm extender | VP-EX20
Use extender when processing sample in long container (such as separation funnel) which standard horn/tip cannot reach.
■: ■:
φ3mm Tapered Micro | VP-MT03
Use taper type micro tip when processing sample in long and narrow container which standard horn/tip cannot reach.
■Processing amount:1 - 10ml ■●There is combination ...
φ5mm Tapered Micro | VP-MT05
Use taper type micro tip when processing sample in long and narrow container which standard horn/tip cannot reach.
■Processing amount:2 - 10ml ■●There is combination ...
φ6mm Tapered Micro | VP-MT06
Use taper type micro tip when processing sample in long and narrow container which standard horn/tip cannot reach.
■Processing amount:3 - 10ml ■●There is combination ...
Coupler | VP-CP01
For installation of VP-050N step-type micro tip
■: ■:
∅38mm cup horn | VP-CH38
Cup horn is option for process sample indirectly (no contact) by circulating water within cup with floating container after putting it on inverted converter.
■: ■:
∅51mm cup horn | VP-CH51
Cup horn is option for process sample indirectly (no contact) by circulating water within cup with floating container after putting it on inverted converter.
■: ■:
Continuous crushing cell (For φ12mm) | VP-CC05
Sequential crushing cell is option for process successively by circulating samples within gap after putting it over standard horn with tip.
■Processing amount:Approx. 19L/h ■●There is combin ...
Continuous crushing cell (For φ20mm) | VP-CC06
Sequential crushing cell is option for process successively by circulating samples within gap after putting it over standard horn with tip.
■Processing amount:Approx. 19L/h ■●There is combin ...
Dedicated stand | VP-ST30
Use for fix converter (VP-300N requires either mute box or stand).
■: ■:
Absorption silencer | VP-SB01
Fix converter on top panel and processing crushing inside prevents rudeness sonorant.
■Dimensions:360 x 350 x 500 Hmm ■:
Foot switch | VP-FS01
Switch for step on
■Remarks:Foot switch ■●Made from Titanium. Tip may ...

Related Products

Ultrasonic homogenizer | Ultrasonic homogenizer | VP-050N
Automatic tuning and easy operation. Various operation modes according to the condition of samples. Small hand-held type is suitable for small-volume samples. For disruption of E. coli, etc. after expression of protein.
■High frequency output:Maximum 50 W ■Transducer normal:10 to 40 W
Translate »