Large size constant temperature incubator shaker
Code No.： 0084266-000
Our flagship incubator has been just renewed with usability improved. Power consumption (Wh) is about 1/6 that of the previous model !
Applications●Culture of Microorganisms such as E. coli and Yeast and Insect cells
●Transport test for foods
Down Load（Useful Information）ADS: About container shapes, shaking speed, amplitude, and culture efficiency.
ADS: Relationship between the shaking speed and the amplitude, as seen from volumetric oxygen transfer coefficient (kLa).
Features●New function “Eco-Drive” realizes drastically power saving.
●Capacity: 32pcs x 500mL Erlenmeyer flasks, 64pcs x Two-tier type
●Stepless adjustment in shaking width between 10 to 50mm
●Program function corresponds various cultures.
Improved usability compared to that of conventional oneWide variations for mass culture are available such as “Two-tier shaking platform”, “Top board made of the same material as the experimental bench” where lightweight equipment and items can be put and “Safety door lock” that prevents accidentally opens.
Also contributes to Energy saving.Equipped with “Eco-drive” function that automatically controls and optimizes the compressor and heater output. Realizes energy saving of up to 1/6 compared to that of our conventional one (made in 2004).
|Number of Shaking platform||Single|
|Ambient temperature range (*1)||5℃ to 35℃|
|Operating temperature range (*1)||4℃ to 70℃|
|Heating/Cooling method||Heater (800W)/Compressor (125W)|
|Shaking speed (*2)||25 to 250r/min|
|Shaking motion/width/Door type||Changeable Reciprocal/Horizontal shaking, 10 to 50mm (stepless), Double swing door|
|Program function||4 programs, 9 segments per 1 program, Setting contents (*3): Temperature, Shaking speed/time per 1 segment, Wait function (Setting range: 00h00min to 99h59min)|
|Safety devices/functions||ELB 15mA (combined use for overcurrent protection 15A), High temp. safety device, Compressor high temp. cut circuit, Motor current limiter, Motor overload protection, Overvoltage protection, Fuse (built-in type), Filter check function, Shaking stop function at abnormal vibration detected, Temp. sensor error, Nonvolatile memory error, sample protection high/low temp. protection (arbitrary setting), door open/close detection, Shaking stop function when motor runaway (abnormal pulse detection)|
|Other functions (*4)||Eco-driving function, Top board|
Automatic chamber lighting function, Connecting holes inside chamber (2 holes), Automatic drying of condensation water (* 5)
|External dimensions (W x D x H)||1327×835×1256mm|
|Platform dimensions||800×600mm（Inside Max.：601mm）|
|Capacity for vessels||Erlenmeyer flask 32pcs x 500mL/6pcs x 5L|
|Maximum load||Approx. 17kg（Shaking platform not included）|
|Standard accessories||1 x Universal shaking platform, 4 x Vibration absorbing pad, 4 x Spacer|
|(*1) Be sure to set the ambient temperature at 30℃ when using below the set temperature 10.0 ℃. The values were measured method defined by us.|
|(*2) The values are common for Reciprocal/Horizontal shaking|
|(*3) There is no temperature gradient function.|
|(*4) Transmission output signal (analog signal) 1V to 5V and alarm output signal (DCV) are also available as an option.|
|(*5) Automatic drying may not catch up and manual drainage may be requested depending on the use conditions|
|* Images and specifications are under development. Specifications and design described in this catalog subject to change without notice.|