Large size constant temperature incubator shaker
Code No.： 0058178-000
Enables to use widely for Cultivation of microbes such as Yeasts, E. coli, etc. that require temp. control and shaking. High-end model that features for stackable, wide range of temp. range, and speed. Cut power consumption by 75% with the conventional one!
Applications● Cultivation of microbes such as E. coli, etc.
● Cultivation of Thermophile and Hybridization
● Cultivation of Yeasts, Psychrophiles, and Insect cells
Down Load（Useful Information）ADS: About container shapes, shaking speed, amplitude, and culture efficiency.
ADS: Relationship between the shaking speed and the amplitude, as seen from volumetric oxygen transfer coefficient (kLa).
Swing lift-up door and Stackable up to Two levels
Upon door lift, it comes about 30cm forward
Swing lift-up door and Stackable up to Two levels contribute space-saving while keeping large capacity. It can be shaked up to 300 r/min (200 r/min at the upper of stacked units) that is optimum for shaking culture.
Contributes to saving energyWhen set above 10℃ above RT, the compressor will not run, while the heater runs for temp. control that is energy saving. It cuts power consumption by 75% with the conventional one!
The top board can be practically used for Lab bench
Comparison to a common experimental bench.
Adopted the same material of Lab bench top board. The top board height is almost the same that of Lab bench.
It is not suitable for precision work, but it can be used as an
auxiliary Lab bench.
Stackable up to 2 levels
Even stacked, upper Shaking Rack is only about 113cm high.
Stacking installation up to 2 levels is possible (We offer free fixing instrument in case stack installation is desired). Even stacked, the height is not too high and easy access for female researches.
|Shaking motion||Switchable Reciprocal/Orbital shaking|
|Temperature range||+4℃ to +80℃|
|Temp. control accuracy (*1)||±0.3℃ to ±1.0℃|
|Speed range (*2)||25 to 200 r/min|
|Shaking width||Switchable 25/50 mm (Default: 25 mm)|
|Platform size/Capacity||700 × 500 mm (Max. inside height: 385 mm), Erlenmeyer flask 500 mL × 24, 5 L × 4|
|Door type||Swing lift-up door|
|Maximum load||approx. 10 kg (Platform not included)|
|Ambient temp. range (*1)||+5℃ to +35℃|
|Heating/Cooling method||Heater 700 W/Compressor 125 W|
|Program functions||1 pattern, 9 segments (4 combinations can be saved): Temp., Shaking speed and Time/per segment (Setting range: 00 h 00 min to 99 h 59 min),Wait function (*3)|
|Display (Temp. and speed)||Digital display|
|Programming Function||4 pattern, 9 segment / temperature shaking speed time (for each segment) [time setting range: 00h00min - 99h59min], wait function (*3)|
|Safety devices/functions||Leakage/Overcurrent breaker, Compressor overheating cut-off circuit, Alarm of abnormal sample temp. (Set as desired), Overload/Overvoltage protection, Fuse, Current limiter, Detecting the door opening and closing,Self-diagnosis function for temperature sensor error, Nonvolatile memory error, Breaking device when motor runaway, Self-check/lamp of filter|
|Dimensions (W × D × H)/Weight||1200 (*4) × 800 × 810 mm (Including Top board: 1200 × 750 × 25 mm), Approx. 235 kg|
|Power supply||AC100V/AC220-240V/12A built-in down transformer|
|Standard accessories||Universal shaking platform MT-7050 ×1 pc (*5), 2 types Spacer × 2 pcs, Fixing bracket for stackable (*6)|
|(*1)The temp. of defrost function is not included. Also, the specifications may not be met outside of the ambient temperature range.|
|(*2)There is a limitation depending on the volume of vessels and the shaking width.|
|(*3)Shaking will start when reaching the preset temp. (*4)Approximately 1800 mm when a delivery cart (not included) is installed.|
|(*5)Clamps are not included.|
|(*6)Included when stacking is desired.|
|●Temp. range and Temp. stability may not be able to meet the specs when it is frozen by continuous operation. Required to defrost it regularly.|
|●Due to the large size and weight of this product, transportation and installation costs will be charged separately.|