Large size constant temperature incubator shaker
Code No.： 0058179-000
Save your space with lift-up door and stackable, enable to use as laboratory table, culture large capacity
Applications●Incubating microorganism such as E. Coli
●Incubating yeast and insect cells, psychrotroph
Down Load（Useful Information）ADS: About container shapes, shaking speed, amplitude, and culture efficiency.
ADS: Relationship between the shaking speed and the amplitude, as seen from volumetric oxygen transfer coefficient (kLa).
Lift up door doesn’t waste the front space
Upon door lift, it comes about 30cm forward
Accepted “lift up door” which slide open vertical. Since it doesn’t need much front space to open, it gives extensive selection for settle. Shaking rack is our conventional drawer type.
Energy saving operation function consumes 1/4 of power consumptionIt saves energy by turning off freezer automatically when the setting temperature is 9ºC higher than environment.
It can work as a side bench when it is not stacked
Comparison to a common experimental bench.
Top board is the same material with bench. Though it is not suitable for precision balance, it can be used as temporal work bench or stillage.
Stackable up to 2 levels
Even stacked, upper Shaking Rack is only about 113cm high.
Stacking installation up to 2 levels is possible (We offer free fixing instrument in case stack installation is desired). Even stacked, the height is not too high and easy access for female researches.
|Temperature Range||+4ºC - +80ºC|
|Temp. Control Accuracy||±0.3ºC - 1.0ºC (*1)|
|Shaking Method||Switch orbital / Reciprocal|
|Shaking Speed||25 - 300rpm (Shake below 200rpm when shaking on upper stack)|
|Amplitude||Switch 25/50mm (*2)|
|Dimensions of stand||700 x 500mm (chamber dimension: 385mm)|
|Loading Limit||Approx. 10kg (exclude Shaking Rack)|
|Door Style||Lift up door|
|Surroundings temperature||+5ºC - +35ºC|
|Heating System||Heater (700W)|
|Display (Temp. and speed)||digital display|
|Programming Function||4 pattern, 9 segment / temperature shaking speed time (for each segment) [time setting range: 00h00min - 99h59min], wait function (*3)|
|Safety device / function||Short/over current breaker, high temperature cutout switch, freezer high temperature cutting circuit, current limiter, overcurrent protection, fuse, filter check lamp, brake function on detection of shaking error, temperature error sensor, nonvolatile memory error, alarm for sample temperature protection (optional), door opening check, brake function on detection of motor overdrive (detection of abnormal pulse)|
|Dimensions||1200 x 800 x 810Hmm (include top board)|
* dimension of top board = 1200 x 750 x 25Hmm
|Weight||Approx. 235kg (*4)|
|Power Supply||AC100V 12A (*5)|
|Standard Accessory||Universal shaking rack (MT-7050, clamp sold separately) x 1, Phillips x 1, spacer board (t1.0/t2.0) x 2 each, cramp for stacking (*6)|
|(*1) Not include temperature change right after defrost function (electromagnetic valve switch) turned on.|
|(*2) 50mm on factory shipment. If you want to change, please call TITEC service center.|
|(*3) Wait function is start shaking after reaching the desired temperature.|
|(*4) Since this machine is very heavy, please make sure the strength of floor.|
|(*5) Allowable voltage fluctuation is ±5% for AC100V.|
|(*6) Cramp for stacking will be attached for those who desire stack installation. Wheels are attached on deliver though they are just for carry and not attached.|
|●Since this machine is large and heavy, we will charge for deliver and install.|