Unit water bath
Code No.： 0068748-000
Higi-spec types of Thermominder.
Applications●Various incubation such as enzyme reaction
●Inactivation of serum and thermal insulation of culture medium
SX-10N can memorize one temperature settings.SX-10N can memorize one temperature setting, and this setting can use combination with timer.
Temperature settings can change at a set time (1min – 99h59min).
Addressed to use at below room temperatureTemperature setting range is -20ºC – +105 ºC for SX-10N. Temperature control below room temperature enabled by combining with optional immersion cooler.
Regulating strong and weak agitation is possibleEquipped with volume control which can control water jet arbitrarily. It can prevent ruffle when using small water bath or small volume of water.
Variable heater capacityHeater capacity can be changed between 0-100%.
A lot of options other than attached plastic water bathIt is possible to facile immediate use with attached poly C water bath or optimization with options for container and purpose.
|Temperature Range||RT+5ºC - +105 ºC(*)|
|Temp. Control Accuracy||from ±0.05ºC|
|Minimum temperature setting unit||0.1ºC (setting and display)|
|Temperature setting||By UP/ DOWN key|
|Flow||Jet blast (volume adjust)|
|Temperature Display||Digital display (switching between setting temperature and inside chamber temperature)|
|Timer||Buzzer timer : 1min - 99h59min|
OFF timer : 1min - 99h59min
Timer for change temperature setting : 1min - 99hr59min
|Memory||One temperature setting|
|Heater||1.0kW (SX-10N can time proportioning variable output: 0-100%)|
|Water level range||Minimum water level: 80mm (from the bottom of PolyC water bath)|
|Safety device / function||Circuit protector (10A), fuse (2A), float type prohibition of boiling while empty, protective cover for heater|
Misalignment high and low temperature error, lowing water, sensor error, auto tuning error, non-volatile storage error
※Notified by buzzer
|Occupying dimensions inside bath||130 x 66 x 135Hmm|
|Dimensions||130 x 135 x 304Hmm|
|Power Supply||AC100V 10.5A|
|Standard Accessory||PolyC water bath ×1 , micro tube floater ×1|
|(*)Temperature setting range is -20ºC - +105 ºC for SX-10N.Temperature control below room temperature enabled by combining with optional immersion cooler.|